Domotica

DomBusEVSE: Smart EVSE Module To Make A Smart Wallbox Working With

DomBusEVSE: slimme module om een EV-laadstation te maken (Wallbox MANAGED mode: charging current set by the domotic controller (by a script, for example) (led status: blue) DomBusEVSE: modulo smart per realizzare una stazione di ricarica EV... Controls an external 2P or 4P contactor to enable or exclude mains power supply, and DDS238 ZN/s or DTS238 ZN/s meters to measure the grid and EV power in single phase and three-phase Can be set in Solar mode, to charge the car using only the energy from photovoltaic or other generator, or 25-100% mode to add power from the electrical grid. DomBus37: 12 Analog/digital Inputs, 3 AC Inputs And 3 Relay 12 Analog Digital Inputs 3 Ac Inputs For Home Automation Systems Creasol DomBusEVSE is a fully tested DIN rail module, designed for Domoticz, Home Assistant, OpenHAB, Node-RED, ioBroker, ., ., ., home automation systems, to charge electric vehicles using the standard SAE 1772 and IEC 62196-2 Mode3 (AC charge, up to 22kW power). 50% mode: use both solar and grid energy, max 50% of the power availability (for example, with 6kW contract, use max 3kW from grid) (Grid Power < 0., 5*EVMAXPOWER; led status: yellow) Modulo EVSE Smart DomBusEVSE: Smart EVSE Module To Make A Smart Wallbox Working With Creasol DomBusEVSE 25% mode: use both solar and grid energy, max 25% of the power availability (for example, with 6kW contract, use max 1500W from grid, + available power from solar) (Grid Power < 0., 25*EVMAXPOWER; led status: yellow) 100% mode: use both solar and grid energy, max full power (for example, with 6kW contract, use max 6kW) (Grid Power < EVMAXPOWER; led status: yellow).